Installation Issues - Can't edit news and underscores galore

registered · Posted: Fri Sep 07, 2007 9:32 pm

You are missing language files. Re-upload your files with a good ftp client like FileZilla.

New Member Joined: Feb 02, 2007 Posts: 24

I understand its a language issue and I have tried all the methods listed above, including re-uploading all the files. What I want to know is what else can be done. Also, where are the language files for the problems I listed above? Thanks.

Posted: Sat Sep 08, 2007 9:28 am

Nothing can be done until your language files get on your server. The language files are sprinkled all over the distribution. There is language at the top level, admin/language, and each module has (usually) 2 language folders.

Posted: Sat Sep 08, 2007 9:34 am

What ftp client are you using? Try FileZilla (free on sourceforge.net).

Posted: Sat Sep 08, 2007 3:25 pm

Ok.. I used filezilla... All the files are on the server and I even went as far as redownloading nuke-7.6 and re-uploading the entire site and nothing changed. The underscores are still there. Which of the 10k language files are these located in so I can check to see if they are corrupt or missing.

As stated before I have tried all the before mentioned advice to no avail.

I have tried the following:

fkelly wrote:

It sounds like you have missing language files. You might want to redo the FTP process and make sure that it completes successfully.

fkelly wrote:

As for FTP, one common problem is that folks get cut off from the server before the process completes. It can be hard to tell. If you re-FTP the files and monitor the process you will get an idea if it completes.

I am not trying to be a smartass, but repeating what has been said already in this thread is not helping me get any closer to the issue at hand. Here are the blocks I have issues with. Please tell me what the location of the language files are that control these block so I can start there.

lilc420 wrote:

Here are the ones on my home page effected.

_WAITINGCONT
· _SUBMISSIONS: 0
· _WREVIEWS: 0
· _WLINKS: 0
· _MODREQLINKS: 0
· _BROKENLINKS: 0
· _UDOWNLOADS: 0
· _MODREQDOWN: 0
· _BROKENDOWN: 0

Admin login block:

_ADMIN
[ _LOGOUT ]

Modules:

_HOME
_INVISIBLEMODULES
_ACTIVEBUTNOTSEE
· _NONE
_NOACTIVEMODULES
_FORADMINTESTS

Frome the user info block:

_BPM
_BUNREAD
_BREAD
_BMEMP
_BLATEST
_BTD
_BYD
_BOVER
_BVISIT
_BVIS
_BMEM
_BTT

Posted: Sat Sep 08, 2007 3:53 pm

Well stuff like _HOME and _FORADMINTESTS are in language/lang-english.php, for example.

What language did you pick for your site in the Admin Panel, Preferences?

Posted: Sat Sep 08, 2007 3:53 pm

You are running PHP-Nuke 7.6? Is it patched?

Posted: Sat Sep 08, 2007 4:06 pm

I am using English, and it is the fully patched 7.6 from nukeresources.com.

Posted: Sat Sep 08, 2007 4:21 pm

So, for example, language/lang-english.php exists on your server and has a non-zero size? And the files have read permissions?

And do you have the multi-language features on or off in Admin Panel / Preferences?

Posted: Sat Sep 08, 2007 9:51 pm

Ok... I deleted everything in my public_html root. I then deleted everything in my database via phpmyadmin.

I downloaded nuke-platinum 7.6b4v2 and ftp'd all files to the root one folder at a time. I then imported the SQL to the database.

Then I edited the config.php file to my database settings. Set file permissions and created my admin account.

I followed all instructions to a T that came with the package.

I have discovered that I am the only one who sees the _CAPS... I had other members go to the website and they say they do not see them... weird.

Any idea what could cause that?

www.xtsquad.com

Now a new problem... when you click on my forums, the page opens with the left block and header... but everything else is just black? This is true with everyone who looked. I loged into the admin panel and forums is active.

www.xtsquad.com

registered · Posted: Sat Sep 08, 2007 11:29 pm

Your language cookie may not be set correctly. Clear your cookies

Also go into your users table and check the language set there for your user

Posted: Sun Sep 09, 2007 7:24 am

I deleted the cookies and all was well... then started browsing the forums to see if all was working and the _CAPS are back. Almost everyone, myself included, is set to english in the nuke_user table. Any other suggestions?

I turned on error reporting and get these above the header.

Warning: main(language/lang-.php) [function.main]: failed to open stream: No such file or directory in /home/xtsquad/public_html/mainfile.php on line 312

Warning: main() [function.include]: Failed opening 'language/lang-.php' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/xtsquad/public_html/mainfile.php on line 312

Warning: get_lang(admin/language/lang-.php) [function.get-lang]: failed to open stream: No such file or directory in /home/xtsquad/public_html/mainfile.php on line 332

Warning: get_lang() [function.include]: Failed opening 'admin/language/lang-.php' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/xtsquad/public_html/mainfile.php on line 332

Posted: Sun Sep 09, 2007 8:17 pm

Then its not reading the correct language from your config table

Posted: Sun Sep 09, 2007 8:58 pm

It's weird how it says it can't open 'language/lang-.php'. Notice the language part (e.g. english) is missing from the filename.

Posted: Mon Sep 10, 2007 6:14 am

I tried everything I could find using the search and none fixed my problem. So I took a more direct approach.

It said the 2 errors where on lines 312 and 323 which both corresponded to the admin only... which is why I was the only one seeing the _CAPS.

Here is the code before.

Code:

if (!defined('FORUM_ADMIN')) {


    if (isset($newlang) AND !stripos_clone($newlang,".")) {


      if (file_exists("language/lang-".$newlang.".php")) {


          setcookie("lang",$newlang,time()+31536000);


          include_once("language/lang-".$newlang.".php");


          $currentlang = $newlang;


      } else {


          setcookie("lang",$language,time()+31536000);


          include_once("language/lang-".$language.".php");


          $currentlang = $language;


      }


   } elseif (isset($lang)) {


      include_once("language/lang-".$lang.".php");


      $currentlang = $lang;


   } else {


      setcookie("lang",$language,time()+31536000);


      include_once("language/lang-".$language.".php");


      $currentlang = $language;


    }


}

I edited lines 312 and 323 from include_once("language/lang-".$language.".php") to ( include_once("language/lang-english.php") and all the _CAPS are gone.

If you can think of any issues this might cause let me know.

Posted: Mon Sep 10, 2007 6:55 am

I think you are just covering up a problem. You must still be having cookie problems, as it looks like it can't set the cookie named 'lang'. Try a different browser maybe just to see if that does anything different.

Posted: Mon Sep 10, 2007 1:40 pm

Because $language isn't being defined correctly. It should be reading from your config table. Either your tables are loaded correctly or your config.php settings are wrong